Skip to main content
PartAndStock
Blog

What Is the WS2811? Addressable LED Driver and Uses

November 14, 2026 4 min read
Quick answer

The WS2811 is an LED driver IC that drives addressable RGB LED strips. Over a single data line it colours each LED group in the chain individually. Unlike the WS2812B, the driver is a separate chip from the LED (usually a 12V strip, 3 LEDs per group). The protocol is timing-critical (FastLED/NeoPixel); on long strips power injection is needed for voltage drop.

The WS2811 is an LED driver IC that drives addressable RGB LED strips. Over a single data line it can colour each LED (or group of LEDs) in the chain individually. Unlike the WS2812B, the driver is a separate chip from the LED (used in most 12 V strips). For the concept, see what is an LED driver.

What is the WS2811 used for?

Addressable LED strips, signage, decorative lighting and pixel effects. The WS2811 usually drives 3 LEDs as one group (in 12 V strips) and is chained over a single data line; the microcontroller sends colour data with a timing-critical protocol.

Specifications

ParameterValue
TypeAddressable RGB LED driver IC
InterfaceSingle wire (timing-critical)
Supply5 V / 12 V (by strip type)
vs WS2812BDriver is a chip separate from the LED

Watch out

The protocol is timing-critical; a library (FastLED/NeoPixel) is usually needed. On long strips, voltage drop and high current require a separate/strong supply and power injection. A series resistor (~330 Ω) on the data line and a large capacitor before the first pixel are recommended. On a 3.3 V MCU a level shifter may be needed for the data line.

Equivalents

  • WS2812B: driver integrated inside the LED (5V, per-pixel).
  • SK6812: WS2812B-compatible (RGBW option).
  • APA102: SPI (clock+data), not timing-critical.

Find it in our catalog

Use the WS2811 search.

Frequently Asked Questions

What is the WS2811?+
The WS2811 is an LED driver IC that drives addressable RGB LED strips. Over a single data line it colours each LED group in the chain individually; unlike the WS2812B, the driver is a separate chip from the LED (used in most 12V strips).
What is the difference between the WS2811 and the WS2812B?+
In the WS2812B the driver is integrated inside the LED (5V, each pixel independent). In the WS2811 the driver is a separate chip and usually drives 3 LEDs as a group (12V strips). Their protocols are similar.
How is the WS2811 controlled?+
With a timing-critical single-wire protocol; a library like FastLED or NeoPixel is usually used. On long strips, power injection is needed against voltage drop.
What is an equivalent to the WS2811?+
The WS2812B for integrated 5V; the SK6812 for RGBW; the APA102 for SPI (not timing-critical).