Skip to main content
PartAndStock
Blog

What Is the APA102? SPI Addressable RGB LED (DotStar)

November 14, 2026 4 min read
Quick answer

The APA102 ('DotStar') is an addressable RGB LED driven over an SPI-like two-wire interface (clock+data). Thanks to the separate clock line it is not timing-critical, unlike the WS2812B, and offers a very high refresh rate; ideal for POV displays. It needs two wires; on long strips power injection is essential. The SK9822 is its compatible clone.

The APA102 ("DotStar") is an addressable RGB LED driven over an SPI-like two-wire interface (clock + data). Thanks to the separate clock line it needs no strict timing, unlike the timing-critical protocol of the WS2812B, and offers a very high refresh rate. For the concept, see what is an LED driver.

What is the APA102 used for?

High-speed LED animation, POV (persistence of vision) displays, stable/flicker-free effects and pixel strips. Thanks to the separate clock line it is independent of CPU timing, so it is fast and easy to drive with hardware SPI.

Specifications

ParameterValue
TypeAddressable RGB LED (integrated driver)
InterfaceTwo wires: Clock + Data (SPI-like)
Supply5 V
AdvantageNot timing-critical, high refresh

Watch out

It needs two wires (clock+data) versus the WS2812B. On long strips, power injection is essential for voltage drop and high current. The global brightness field can cause colour banding at low values. The SK9822 is a common compatible clone of the APA102.

Equivalents

  • SK9822: APA102-compatible (common clone).
  • WS2812B: single wire, timing-critical.
  • SK6812: WS2812B-compatible (RGBW).

Find it in our catalog

Use the APA102 search.

Frequently Asked Questions

What is the APA102?+
The APA102 ('DotStar') is an addressable RGB LED driven over an SPI-like two-wire interface (clock+data). Thanks to its separate clock line it is not timing-critical and offers a very high refresh rate.
What is the difference between the APA102 and the WS2812B?+
The WS2812B is single-wire and timing-critical; the APA102 is two-wire (clock+data) and needs no strict timing. The APA102 gives a higher refresh (ideal for POV) but needs one more wire.
Why is the APA102 preferred for POV?+
Thanks to its separate clock line it reaches a very high, stable refresh rate; this is needed for a flicker-free image on spinning/moving POV displays.
What is an equivalent to the APA102?+
The compatible clone SK9822; the WS2812B for single-wire; the SK6812 for RGBW.