Skip to main content
PartAndStock
Blog

What Is the DB107? 1A Bridge Rectifier and Uses

November 20, 2026 4 min read
Quick answer

The DB107 is a 1 A bridge rectifier holding four diodes in one body. It provides the full bridge needed to convert AC to DC in one package (up to 1000 V). It has four terminals: two ~ (AC), + and − (DC). A filter capacitor is needed on the output for smooth DC. It saves board space versus four separate 1N4007s.

The DB107 is a 1 A bridge rectifier that holds four diodes in one body. It provides the full bridge needed to convert AC to DC in a single package. For the concept, see what is a rectifier diode.

What is the DB107 used for?

AC→DC conversion (full-wave rectification) in small power supplies, rectifying adapter and transformer outputs. Using one DB107 instead of four separate 1N4007s saves board space and eases assembly.

Connection

It has four terminals: two ~ (AC input), one + (DC positive output), one − (DC negative output). The AC source connects to the ~ terminals; the DC load is taken from the +/− terminals.

Specifications

ParameterValue
TypeSingle-phase bridge rectifier
Current1 A
Reverse voltageUp to 1000 V (DB107 = 1000V)

Watch out

For smooth DC after rectification a filter capacitor is needed on the output. It heats at high current; the 1 A limit must not be exceeded, and if needed choose cooling/a bigger bridge (KBPC series). In the DB1xx series the last digit indicates the reverse voltage (DB107=1000V).

Equivalents

  • W10 / MB10S: similar 1A bridge rectifiers.
  • KBPC5010: a high-current (50A) bridge.
  • 4× 1N4007: building a bridge from separate diodes.

Find it in our catalog

Use the DB107 search.

Frequently Asked Questions

What is the DB107?+
The DB107 is a 1 A bridge rectifier holding four diodes in one body. It provides the full bridge needed to convert AC to DC in a single package and withstands reverse voltage up to 1000 V.
How is the DB107 connected?+
It has four terminals: two ~ (AC input), one + (DC positive) and one − (DC negative). The AC source connects to the ~ terminals and the DC load is taken from the +/− terminals. A filter capacitor is needed on the output for smooth DC.
What voltage/current is the DB107?+
It is rated 1 A and 1000 V reverse voltage (in the DB1xx series the last digit indicates the voltage). The 1 A limit must not be exceeded; for high current choose a KBPC-series bridge.
What is a DB107 equivalent?+
Similar 1A bridges are the W10/MB10S; for high current the KBPC5010; or build a bridge from four separate 1N4007s.