What Is the TMC2208? Silent Stepper Motor Driver (3D Printer)
The TMC2208 is a stepper motor driver famous for silent operation. With StealthChop it drives the motor almost silently and is configured over UART; it delivers ~1.4 A RMS and does up to 1/256 microstepping. It is preferred over the A4988/DRV8825 in 3D printers (same StepStick size). Vref and board compatibility must be verified.
The TMC2208 is a stepper motor driver famous for silent operation. Thanks to its StealthChop technology it drives the motor almost silently; it is preferred over the A4988/DRV8825, especially in 3D printers. For the concept, see what is a motor driver.
What is the TMC2208 used for?
Driving bipolar stepper motors in 3D printers, CNC and robots. With silent drive (StealthChop) and current/microstep configuration over UART it is a quieter, more flexible driver; it is the same StepStick module size as the A4988/DRV8825 (plugs directly into most boards).
Specifications
| Parameter | Value |
|---|---|
| Type | Bipolar stepper motor driver |
| Highlight | StealthChop (silent) + UART config |
| Current | ~1.4 A RMS (~2 A peak, with cooling) |
| Microstep | Up to 1/256 (internal interpolation) |
Watch out
Unlike the A4988, note that some pins (e.g. MS/UART) are used differently; verify board compatibility. The current (Vref) setting matters so the motor doesn't overheat. StealthChop is silent at low speed; at high speed/torque it switches to SpreadCycle. The module heats; a heatsink/airflow is needed.
Equivalents
- A4988: a classic stepper driver (noisier).
- DRV8825: a higher-current stepper driver.
- TMC2209: a higher-current relative with sensorless homing.
Find it in our catalog
Use the TMC2208 search.