Skip to main content
PartAndStock
Blog

What Is the OP07? Precision Op-Amp and Uses

November 16, 2026 4 min read
Quick answer

The OP07 is a precision op-amp with a very low input offset voltage. It is preferred in measurement, instrumentation and bridge/thermocouple reading circuits where DC accuracy is critical. Thanks to its very low offset and drift it is used in precise measurements where general op-amps like the LM741 fall short. Its bandwidth is narrow; not suitable for audio/speed.

The OP07 is a precision op-amp with a very low input offset voltage. Because its offset is very low, it is preferred in measurement and instrumentation circuits where DC accuracy is critical. For the concept, see what is an op-amp.

What is the OP07 used for?

Precision DC amplifiers, instrumentation front ends, thermocouple/bridge sensor reading and low-drift measurement circuits. Thanks to its very low offset and low drift it is used in precise measurements where general-purpose op-amps like the LM741 are not enough.

Specifications

ParameterValue
TypePrecision bipolar op-amp
HighlightVery low input offset voltage (~µV)
SupplyDual (±) — typically ±3 – ±18 V
PackageDIP-8 / SOIC-8 (single channel)

Watch out

Its bandwidth is narrow (~600 kHz range); not suitable for high speed/audio. It is not rail-to-rail and is usually used with a dual (±) supply. To keep the precision, layout, thermal balance and a low-noise supply matter. It is single-channel.

Equivalents

  • OP27 / OP37: low-noise precision op-amps.
  • LT1013: a precision dual op-amp.
  • LM358: general-purpose (lower precision).

Find it in our catalog

Use the OP07 search.

Frequently Asked Questions

What is the OP07?+
The OP07 is a precision op-amp with a very low input offset voltage. It is preferred in measurement, instrumentation and bridge/thermocouple reading circuits where DC accuracy is critical.
Why is the OP07 used in precise measurements?+
Its input offset voltage and drift are very low. This lets it amplify small DC signals without error; the offset of general op-amps like the LM741 is too high for this job.
Is the OP07 suitable for audio?+
Generally not; its bandwidth is narrow (~600 kHz). For high speed/audio, types like the NE5532/LM4562 are suitable. The OP07 is for DC precision.
What is an equivalent of the OP07?+
The low-noise precision OP27/OP37; the precision dual LT1013; the general-purpose LM358.