Skip to main content
PartAndStock
Blog

What Is the MQ-7? Carbon Monoxide (CO) Gas Sensor and Uses

November 21, 2026 4 min read
Quick answer

The MQ-7 is a gas sensor sensitive to carbon monoxide (CO). It is designed for CO detection; it gives an analog and a digital threshold output. For correct operation its heater must be driven cyclically (e.g. alternating ~5 V and ~1.4 V). It needs calibration and is cross-sensitive. For life safety use a certified CO detector; a hobby module is not a critical safety device.

The MQ-7 is a gas sensor sensitive to carbon monoxide (CO). It is designed specifically for CO detection and, to work correctly, its heater must be driven cyclically (high/low voltage). For the concept, see what is a gas sensor.

What is the MQ-7 used for?

Carbon monoxide (CO) monitoring: garages, boiler rooms, indoor safety (for alert projects). It is in the same MQ family as the MQ-2 and MQ-135; the MQ-7 focuses on CO. It gives an analog and a digital threshold output.

Specifications

ParameterValue
TypeSemiconductor gas sensor (CO)
TargetCarbon monoxide (CO)
HeaterCyclic (high/low voltage) required
OutputAnalog (AO) + digital threshold (DO)

Watch out

For accurate CO measurement the MQ-7 needs its heater driven cyclically (e.g. alternating ~5 V and ~1.4 V); a fixed supply won't give the ideal result. Calibration is needed; there is cross-sensitivity. For life safety use a certified CO detector; a hobby module is not a critical safety device.

Equivalents

  • MQ-2: flammable gas/smoke.
  • MQ-135: general air quality.
  • MQ-9: CO + flammable gas (similar cyclic heating).

Find it in our catalog

Use the MQ-7 search.

Frequently Asked Questions

What is the MQ-7?+
The MQ-7 is a gas sensor sensitive to carbon monoxide (CO). It is designed for CO detection and gives an analog and a digital threshold output. For correct operation its heater must be driven cyclically.
How does the MQ-7 work?+
Its heater is driven cyclically (e.g. alternating ~5 V and ~1.4 V); the high-voltage phase cleans, the low-voltage phase reads CO. A fixed supply does not give the ideal result.
Can the MQ-7 replace a CO detector?+
No. For life safety a certified CO detector must be used; the MQ-7 is for hobby/alert projects and is not a critical safety device. It requires calibration and is cross-sensitive.
What is an MQ-7 equivalent?+
The MQ-2 for flammable gas/smoke; the MQ-135 for general air quality; the MQ-9 for CO + flammable gas.