What Is the LMV358? Low-Voltage LM358 Op-Amp and Uses
The LMV358 is a dual-channel op-amp that is the low-voltage version of the LM358. It has the same pinout as the LM358 but runs at low supplies (2.7–5.5 V) and offers a rail-to-rail output; used in 3.3V/5V circuits. Being the same pinout, it can be used directly in LM358 designs when low-voltage/RRO is needed. If you need the LM358's wide supply above 5 V, it is not suitable.
The LMV358 is a dual-channel op-amp that is the low-voltage version of the LM358. It has the same pinout as the LM358 but is designed to run at lower supply voltages (2.7–5.5 V) with an output that reaches the supply rail (rail-to-rail output). For the concept, see what is an op-amp.
What is the LMV358 used for?
Sensor signal amplification, buffers and active filters in 3.3 V/5 V microcontroller circuits. Since it has the same pinout as the LM358, it can be used directly in existing LM358 designs when low-voltage/RRO behaviour is needed.
Specifications
| Parameter | Value |
|---|---|
| Type | Dual low-voltage op-amp (LM358 pinout) |
| Supply | 2.7 – 5.5 V (single) |
| Output | Rail-to-rail output (nears the rail) |
| Package | SOIC-8 / DIP-8 |
Watch out
Its bandwidth is limited; high frequency/audio needs a faster op-amp. The "rail-to-rail output" nears the rails but a few mV of margin remains under load; the input may not be fully rail-to-rail (see the datasheet). If you need the LM358's wide supply range above 5 V, the LMV358 is not suitable (it is a low-voltage part).
Equivalents
- LM358: the classic wide-supply dual op-amp.
- MCP6002: an RRIO CMOS low-power op-amp.
- LMV324: the quad-channel low-voltage version.
Find it in our catalog
Use the LMV358 search.