Skip to main content
PartAndStock
Blog

What Is the TB6612FNG? Efficient Dual H-Bridge Motor Driver

November 17, 2026 4 min read
Quick answer

The TB6612FNG is an efficient, MOSFET-based dual H-bridge motor driver that drives two DC motors. It delivers ~1.2 A continuous (~3.2 A peak) per channel and runs at 2.5–13.5 V motor voltage. Unlike the L298N it heats little and is more efficient at low voltage. The STBY pin must be HIGH; logic and motor supplies are separate. It is for small motors/robots.

The TB6612FNG is an efficient, MOSFET-based dual H-bridge motor driver that can drive two DC motors. Unlike the classic L298N, its low voltage drop and high efficiency make it a favourite in battery/robot projects. For the concept, see what is a motor driver.

What is the TB6612FNG used for?

Direction and speed (PWM) control of two DC motors; small robots, cars and mechanisms. Thanks to its MOSFET output stage it heats far less than the L298N's bipolar design, and more power reaches the motor at low voltage.

Specifications

ParameterValue
TypeDual H-bridge DC motor driver (MOSFET)
Current~1.2 A continuous / ~3.2 A peak (per channel)
Motor voltage2.5 – 13.5 V
Control2× PWM + direction (IN1/IN2), STBY

Watch out

The STBY (standby) pin must be high, otherwise the output stays off. Logic (VCC) and motor (VM) supplies are separate. At high current the module's heat dissipation is limited; versus the L298N's above-2 A jobs, the TB6612 is for small motors. It has built-in diodes for inductive loads, but mind surge currents.

Equivalents

  • DRV8833: a similar dual H-bridge, low voltage.
  • L298N: a classic but hotter-running bipolar driver.
  • MX1508: a cheap dual H-bridge alternative.

Find it in our catalog

Use the TB6612FNG search.

Frequently Asked Questions

What is the TB6612FNG?+
The TB6612FNG is an efficient, MOSFET-based dual H-bridge motor driver that can drive two DC motors. It delivers ~1.2 A continuous per channel; it heats far less than the L298N and is more efficient at low voltage.
What is the difference between the TB6612FNG and the L298N?+
The TB6612 has MOSFET outputs, heats little and delivers more power to the motor at low voltage. The L298N is bipolar, runs hot but can drive higher-current motors. For small robots the TB6612 is preferred.
What is the TB6612FNG STBY pin for?+
The STBY (standby) pin enables the driver; when it is LOW the outputs are off. STBY must be set HIGH for the motors to run.
What is an equivalent to the TB6612FNG?+
The similar low-voltage DRV8833; the classic L298N; the cheap MX1508.