What Is the LM1084? 5A Low-Dropout Regulator (LDO) and Uses
The LM1084 is a low-dropout linear voltage regulator (LDO) that outputs up to 5 A. It comes in fixed (3.3V/5V) and adjustable versions; used in high-current low-dropout applications. It is like the high-current relative of the AMS1117 (~1A). Being linear it makes heat; a good heatsink is a must. For stability an output capacitor is needed.
The LM1084 is a low-dropout linear voltage regulator (LDO) that can output up to 5 A. It comes in fixed (e.g. 3.3 V/5 V) and adjustable versions; used in high-current low-dropout applications. For the concept, see what is a voltage regulator.
What is the LM1084 used for?
High-current 3.3 V/5 V supplies, FPGA/SoC power rails, LEDs and general high-current linear regulation. It can be thought of as a much higher-current (5 A) relative of the AMS1117 (~1 A); thanks to its low dropout the input-output difference can be small.
Specifications
| Parameter | Value |
|---|---|
| Current | Up to ~5 A |
| Type | Low-dropout linear (LDO) |
| Version | Fixed (3.3V/5V…) and adjustable (ADJ) |
| Body | TO-220 / TO-263 |
Watch out
Even at 5 A it is linear, so it makes heat equal to input-output difference × current; a good heatsink is a must. For stability the output needs the datasheet's specified (usually tantalum/ceramic) capacitor. On the ADJ version the output is set with a two-resistor divider. If very high efficiency is needed, a switching solution is chosen.
Equivalents
- AMS1117: a ~1 A low-dropout LDO (lower current).
- LM1085 / LM1086: the 3A/1.5A members of the same family.
- LD1117: a common compatible LDO alternative.
Find it in our catalog
Use the LM1084 search.