Skip to main content
PartAndStock
Blog

What Is the CA3140? MOSFET-Input Op-Amp (BiMOS) and Uses

November 17, 2026 4 min read
Quick answer

The CA3140 is a MOSFET (PMOS) input, very-high-input-impedance op-amp (BiMOS). Since its input can go down to the negative rail (GND), it is a classic choice in single-supply and high-impedance circuits; it reads sources like piezo/pH/photo without loading them. Its output is not rail-to-rail; the MOSFET input is ESD-sensitive.

The CA3140 is a MOSFET (PMOS) input, high-input-impedance op-amp (BiMOS). With its very high input impedance and an input that can go down to the negative supply rail, it is a classic choice in single-supply and high-impedance circuits. For the concept, see what is an op-amp.

What is the CA3140 used for?

Reading high-impedance sensors (piezo, pH, photo), buffers, active filters and single-supply analog circuits. Thanks to its MOSFET input the input current is very low; its input can operate including the negative rail (GND), which eases single-supply use.

Specifications

ParameterValue
TypeBiMOS op-amp (MOSFET input)
InputVery high impedance (low input current)
Bandwidth (GBW)~4.5 MHz
SupplySingle or dual (wide range)

Watch out

Its output is not rail-to-rail; margin remains as the output nears the top rail. The MOSFET input is sensitive to static (ESD). If precise DC offset is needed, precision types like the OP07 are better; the CA3140's strength is high input impedance and single-supply flexibility.

Equivalents

  • TL071: a JFET-input, high-impedance op-amp.
  • LF356: a JFET-input fast op-amp.
  • CA3130: a relative in the same family.

Find it in our catalog

Use the CA3140 search.

Frequently Asked Questions

What is the CA3140?+
The CA3140 is a MOSFET (PMOS) input, very-high-input-impedance op-amp (BiMOS). Since its input can go down to the negative supply rail, it is a classic choice in single-supply and high-impedance circuits.
Why is the CA3140 good for high impedance?+
Thanks to its MOSFET input the input current is very low; it reads high-impedance sources like piezo, pH or photo without loading them. This lets the signal be picked up without distortion.
Does the CA3140 work on a single supply?+
Yes; since its input can operate including the negative rail (GND), single-supply use is easy. However, its output is not rail-to-rail, and margin remains as it nears the top rail.
What is an equivalent of the CA3140?+
The JFET-input TL071; the JFET-input fast LF356; the same-family CA3130.